The cost to fix a washing machine in the UK usually ranges from £70 to £400, with many repairs costing around £125.

Simple faults, such as blocked filters or loose connections, often cost less. More serious faults, such as drum bearings, control boards, or major internal issues, can cost £200 or more.

The final price depends on the fault, the make and model, the replacement part, labour time, and how easily the engineer can access the damaged component. Integrated washing machines and premium brands can cost more because they often take longer to dismantle and may require higher-priced genuine manufacturer parts.

Appliance Repairs Bristol Ltd diagnoses and repairs washing machines throughout Bristol and the surrounding areas. We work on all major makes, including Bosch, Beko, Miele, Samsung, Hotpoint, Hoover, and Neff. We also offer remote video diagnostics where possible, with no call-out fee, no diagnostic fee, no separate travel or parking charges, and no VAT added.

Average Washing Machine Repair Costs

Most washing machine repair bills fall between £70 and £200. Repairs involving drum bearings, major electrical components or extensive dismantling may cost between £180 and £400.

These figures are typical estimates rather than fixed prices. The condition of the appliance, the availability of the part, and any related damage can change the final cost.

Appliance Repairs Bristol Ltd does not charge a call-out or diagnostic fee. Most faults are assessed remotely through a video call before an engineer attends. There are no separate travel or parking charges, and the business is not VAT registered, so VAT is not added to the repair bill.

Need a repair cost for your machine? Provide the make, model number, error code, and a short video of the fault for an initial remote assessment.

What Affects Washing Machine Repair Costs?

The Type of Fault

The fault has the greatest effect on the repair price. Clearing a blocked filter requires far less labour than removing the drum to replace worn bearings.

A machine that refuses to drain may only need coins, hair or fabric removed from the filter. A machine making a deep rumbling noise during the spin cycle may have damaged bearings, seals or drum components.

The Make and Model

Parts for common brands such as Beko, Hotpoint and Hoover are often widely available. This can keep repair costs lower and make it easier to complete the work during one visit.

Premium brands such as Miele, Bosch and Neff may require higher-priced genuine parts. Older machines can also cost more if parts have been discontinued or must be ordered from a specialist supplier.

Premium brand repairs can sometimes cost 15% to 30% more than comparable work on a common mass-market model.

The Price of Genuine Parts

Appliance Repairs Bristol Ltd uses genuine manufacturer parts. These parts are made for the specific appliance model and provide the correct fit, electrical rating and operating performance.

Genuine parts may cost more than unbranded alternatives, but they reduce the risk of incorrect sizing, poor connections or early part failure.

Freestanding or Integrated Design

Integrated washing machines can take longer to repair because the engineer may need to remove cupboard doors, plinths or surrounding fittings before reaching the appliance casing.

Appliance Repairs Bristol Ltd repairs both freestanding and integrated washing machines. Customers should mention that the appliance is integrated when booking so the engineer can allow for access and fitting time.

Labour Time

Most straightforward repairs take between one hour and 90 minutes. Replacing drum bearings, repairing internal leaks or dealing with damaged drum parts can take two to three hours.

Providing the make, model number, error code and a clear description of the fault can help with diagnosis. A short video of the noise, leak or control panel can also help identify the likely cause before the appointment.

Common Washing Machine Faults and Prices

Washing Machine Not Draining

A washing machine that will not drain usually has a blocked filter, blocked hose or failed drain pump, with repairs commonly costing between £80 and £150.

Coins, hair, lint, buttons and pieces of fabric can collect inside the pump filter. In many cases, clearing the obstruction restores the drainage cycle without requiring a replacement part.

If the pump motor has failed, the engineer will need to remove the damaged pump and fit a new genuine replacement. Once drainage is restored, water can leave the drum properly and the machine can complete its cycle.

Water Leaking From the Door

A washing machine leaking from the door often needs a new rubber door seal, which usually costs between £70 and £100.

The door gasket can tear, perish or become distorted over time. Dirt and detergent residue can also prevent the seal from closing correctly.

During this repair, the retaining band is removed, the damaged seal is taken out and a matching manufacturer part is fitted. Once secured correctly, the replacement seal restores a watertight connection between the drum and the front of the machine.

Loud Grumbling or Rumbling Noise

A loud rumbling noise during the spin cycle often points to worn drum bearings, with repairs usually costing between £180 and £300 or more.

Bearing replacement involves a substantial strip-down of the appliance. The engineer may need to remove the drum, pulley, belt, seal and other internal parts.

If the drum spider is also corroded, the repair cost can rise. On an older machine, extensive drum damage may make replacement the better financial choice.

Clothes Coming Out Cold or Poorly Washed

Cold washing can indicate a failed heating element, with replacement usually costing between £70 and £100.

Limescale can build up around the heating element, particularly in hard water areas. Electrical faults can also stop the appliance from heating the water.

A correctly fitted replacement restores normal water heating, helping detergent work correctly and allowing the programme to complete at the selected temperature.

Drum Not Turning or Spinning

A drum that will not turn may have a snapped drive belt or worn motor carbon brushes. A belt replacement can cost between £30 and £60, while motor brush replacement usually costs between £80 and £150.

A belt can stretch, slip or snap. Motor brushes wear down through repeated use and may cause intermittent spinning before the drum stops turning completely.

Fitting the correct belt or motor brushes can restore the spin cycle, provided the motor and control board have not suffered further damage.

Washing Machine Will Not Start

A washing machine that will not start may have a faulty door lock, damaged power component or control board fault.

The door interlock tells the machine that the door is safely closed. If the lock fails, the cycle may not begin. A machine that remains completely dead may have a power supply, wiring or control module problem.

A remote video assessment can help rule out simple setting or power issues before an engineer attends.

Should You Repair or Replace Your Washing Machine?

Repair is usually the better choice when the machine is under ten years old, has one isolated fault and costs less than half the price of a suitable replacement.

A damaged heating element, pump, belt, door seal or thermostat can often be repaired at a sensible price. Repair can also make sense for an integrated appliance because replacing it may involve new fittings, cupboard adjustments or door alignment work.

Repair may be the right choice when:

• The machine has one clear fault.
• The appliance is relatively new.
• The repair costs less than 50% of a suitable replacement.
• The machine was reliable before the fault appeared.
• The appliance is still under its manufacturer or retailer warranty.
• Replacing an integrated model would create extra fitting costs.

Replacement may make more sense when:

• The machine is over ten years old and keeps developing faults.
• Several components have failed at the same time.
• The drum, bearings and control board all show signs of wear.
• The repair would cost more than half the price of a new machine.
• The appliance uses far more water or electricity than a newer model.
• The machine overheats, trips the consumer unit or has damaged wiring.

Repeated repairs can become a false economy. A good diagnosis should consider the condition of the whole appliance, the availability of future parts and the likely remaining working life.

Checks to Make Before Calling an Engineer

Homeowners can safely check the power supply, water valves, drain filter, load balance and external hoses before arranging a repair.

• Check that the plug is secure and the wall socket is switched on.
• Confirm that the water supply valves behind the machine are open.
• Inspect the inlet and drain hoses for crushing, twisting or kinks.
• Redistribute a heavy or uneven load before trying the spin cycle again.
• Place towels and a shallow tray near the filter before removing it.
• Clear coins, hair, lint and fabric from the pump filter.
• Write down any error code shown on the control panel.

Stop using the machine if it smells of burning, produces sparks, repeatedly trips the consumer unit or leaks close to electrical parts.

Repairs involving internal wiring, heating elements, motors, water valves, bearings or printed circuit boards should be handled by an appliance engineer. Removing the casing without suitable testing and electrical isolation can create shock, flooding and reassembly risks.

Washing Machine Repairs Across Bristol

Appliance Repairs Bristol Ltd covers Bristol and many surrounding areas. Same-day appointments are available in many cases, depending on engineer availability, location, and whether parts are required.

Customers in Bedminster, Clifton, Redland, Bishopston, Horfield, Fishponds, and Brislington can arrange local washing machine repairs without separate travel or parking charges.

The service also covers homes and businesses in Bradley Stoke, Filton, Patchway, Stoke Gifford, Kingswood, Hanham, and Emersons Green.

Customers further out in Bath, Keynsham, Clevedon, Portishead, Thornbury, Yate, and Chipping Sodbury can also request an appointment.

Repairs are available for homeowners, landlords, tenants, letting agents, rental properties, and managed accommodation. Appliance Repairs Bristol Ltd accepts enquiries 24 hours a day, seven days a week.

Six-Month Repair Guarantee

Repairs completed by Appliance Repairs Bristol Ltd come with a six-month guarantee.

The guarantee covers the completed repair for six months. Customers should keep their invoice and contact the business if the same repaired fault returns.

At the time of writing, the company had a Google rating of 4.9 from 239 reviews, based on the information supplied when this article was published.

Washing Machine Repair FAQs

How much does it cost to fix a washing machine?

It usually costs between £70 and £400 to fix a washing machine in the UK, with many repairs costing around £125. The price depends on the fault, appliance brand, part cost, labour time and condition of the machine.

Is it worth repairing a washing machine?

It is usually worth repairing a washing machine when it is under ten years old and the repair costs less than 50% of a replacement. A machine with repeated faults, poor efficiency or major drum damage may be better replaced.

How much does a washing machine engineer charge?

Engineer charges depend on the fault, labour time and required part. Appliance Repairs Bristol Ltd does not charge a diagnostic, call-out, travel or parking fee, and VAT is not added because the business is not VAT registered.

How much does it cost to replace a washing machine pump?

A washing machine drain pump replacement usually costs between £80 and £150. The price depends on the pump model, appliance design and time required to remove and fit the part.

How much does it cost to replace washing machine bearings?

Washing machine bearing replacement usually costs between £180 and £300 or more. The job requires extensive dismantling and may not be economical if the drum spider or outer tub is damaged.

Can I fix a washing machine myself?

You can safely clean the filter, check external hoses, balance the load and confirm the power and water supplies. Internal electrical, motor, heating, bearing and control board repairs should be completed by a trained engineer.

How long does a washing machine repair take?

Most washing machine repairs take between one hour and 90 minutes. Bearing repairs, internal leaks and major mechanical work can take two to three hours.

Do you repair integrated washing machines?

Yes, Appliance Repairs Bristol Ltd repairs both integrated and freestanding washing machines. Mention that the appliance is integrated when booking so access and fitting requirements can be assessed.

Do you repair all washing machine brands?

Yes, Appliance Repairs Bristol Ltd works on all major washing machine brands. This includes Bosch, Beko, Miele, Samsung, Hotpoint, Hoover, Neff and many other manufacturers.

Can you repair a washing machine on the same day?

Same-day washing machine repairs are available in most cases. Appointment availability, the fault and whether a replacement part is in stock can affect completion time.

Book a Washing Machine Repair in Bristol

Appliance Repairs Bristol Ltd provides washing machine repairs across Bristol and surrounding areas. The service covers drainage faults, leaks, spin failures, heating problems, unusual noises, door lock faults, motors, pumps, and electrical issues.

Before booking, provide the appliance make, model number, error code, and a short description of the problem. A photo or video can often help James Gilks diagnose the fault remotely before arranging a visit.

To arrange a repair, call 0117 905 7731 or email info@appliancerepairsbristolltd.co.uk.

The cost to fix a washing machine depends on the failed component, labour time, and condition of the appliance, but many common faults can be repaired for far less than the price of a new machine.